Energy Additives offers an affordable multi-stage filter/coalescer/trap from BlueMoon, Inc. that exceeds the requirements of excellence in filtration needed to protect today's fuel injectors and precision components, vital to the safe efficient vehicle operation of alternative fuel systems. This patented process ensures the removal of damaging aerosol contamination as small as 0.3 to 0.6 micron with an efficiency of 99.5%.

The Multi-Stage Filtration system from Energy Additives, Inc. is based upon a combination of the principles, fluid movement, particulate and droplet, action, re-action, interception plus molecular motion along with diffusion.

Stage One: This initial stage is designed to remove and then hold the water, heavy oils, and particulate from the fuel as it passes through the filter. As the fuel moves through the first stage, water droplets collide forming larger droplets. These larger droplets fall out of the fuel flow and are trapped. The larger, heavier particulate, by nature, falls out of suspension in this stage. Inertia and size will also trap medium sized 40-micron to small 20-micron particulate. Heavy oils will also be removed and held in this stage, along with most sulfur. As an added benefit, when the size of the water droplets increases, smaller particulate, heavy oils, sulfur, etc., are encapsulated in the water droplets and held.

Stage Two: In this stage, spacing causes medium sized particulate and droplets to collide and form larger droplets. While this material is lighter than what is collected in stage one, the lighter particulate and droplets are either held in this stage or will be held when they reach a larger sized drop during the first stage. This stage removes particulate and water down to the 20-micron level. By designing the second stage to allow the particulate and water droplets to move back to the first stage as they become larger, filter life is prolonged.

Stage Three: Fuel enters the stage where small particulate, water droplets, and heavy oil droplets do not follow the flow path perfectly, but randomly collide with each other. The walls of this filter stage, and/or the filter media, cause larger droplets to form and encapsulate particulate and heavy oil aerosol droplets within the small micron 10-micron filter stage.

Stage Four: The final stage was designed to present optimum structure of filter media. Not channel-like, but rather to continuously present new, rough surfaces as obstacles in the flow path. This causes the finer particulate, water, and heavy oils to strike the rough surfaces, and each other, until they become large enough to be held in this media. Since most of the larger water, heavy oils, and particulate molecules have been removed before entering this phase, the 5-micron stage is able to work longer and more efficiently. This unique multistage system design does not have leaks around the filter cartridge and unfiltered fuel is not allowed into the system.

Where to Find Us:

Energy Additives, Inc.
PO Box 1694
Battle Creek, MI 49016

Phone: 1+ 269 965-8085

Our Products

Print Print  |  Sitemap  |  Privacy Policy  |  Terms of Use
© Energy Additives Inc